The Chechs X-Build

The Chech

First Fill-Up (of many)
Location
Kaneohe Bay
So they finally came into day the hubs and at a perfect time to right as I was swapping out tires :D. litterly took 30 minutes even with the tire swap
Out with the old (thats me pointing not giving it the bird)
376620_3504584340625_599902371_n.jpg

In with the new
486470_3504593260848_1685093517_n.jpg
 

The Chech

First Fill-Up (of many)
Location
Kaneohe Bay
Well today was a kinda of busy day got a few small things done finally got around to fixing my Upper A arm that was outta wack, and made some tree cutters for those tights trails I always seem to find myself on some how. (pics below)
551778_3518294643374_913417583_n.jpg

Sorry for upside down picture didn't realize it till it was all said and done
228585_3518297363442_251661986_n.jpg

530883_3518289083235_2080541576_n.jpg



And I finally got the sticker (was about time....) *edit took me long enough to buy not the shipping, took like 3 days :D
526281_3513602526074_519503696_n.jpg
 
Last edited:

Xado89

Skid Plates
Location
Ocala, FL
Like the tree cutters, looks sick, and I've been taking a long time with purchasing my XN sticker too, deciding which design I actually want! haha It'll be on there soon though!
 

The Chech

First Fill-Up (of many)
Location
Kaneohe Bay
Only seen one other with them and they'll be worth it around my area nothing but tree and vines at the local trails. Just debating whether I should paint them or not they seem a little flashy.
 

Kris&HerX

Bumpers Installed
Founding Member
Location
Boise, ID
Following good ole RedX huh? lol I call them limb risers.... cause that's pretty much the purpose. You don't want to "cut" the trees. Tread Lightly
 

The Chech

First Fill-Up (of many)
Location
Kaneohe Bay
But it doesn't flow off the tongue o_O lol. But no I got the coated cable so it wouldn't cut into them just push them out of the way of my wind shield and antenna.
 

The Chech

First Fill-Up (of many)
Location
Kaneohe Bay
So over labor day week end decided to go on the small trail near my father house while I was down there and ended up in a bowl of muck :(

to make things worse we had the worst flash flood in that area in like a good 8+ years so it ended up sinking....
260032_3548691523277_735122405_n.jpg

185058_3548682203044_623076904_n.jpg

422646_3548681163018_1851628796_n.jpg


had to wait several hours till my buddy and his Cherokee came and for the monsoon to stop was an interesting afternoon....
 

Xado89

Skid Plates
Location
Ocala, FL
I found a similar hole once with my Old Nissan Hardbody haha, The ruts were too deep and I got stuck on my chasis had to wait for my buddy to come get me.



Ohh and I found a good Hole with my Old truck



This guy is on an 8 inch lift with 37 inch trail grapplers too btw and those things are gone.


It's fun getting stuck in a way because you find out what you and your rig can handle, glad you got out ok though buddy and nothing went wrong, seen some bad snatches round here.
 
Last edited by a moderator:

Macland

Titan Swapped / SAS'd
Founding Member
I found a similar hole once with my Old Nissan Hardbody haha, The ruts were too deep and I got stuck on my chasis had to wait for my buddy to come get me.



Ohh and I found a good Hole with my Old truck



This guy is on an 8 inch lift with 37 inch trail grapplers too btw and those things are gone.


It's fun getting stuck in a way because you find out what you and your rig can handle, glad you got out ok though buddy and nothing went wrong, seen some bad snatches round here.

I've got a big 250 stuck like that while at work one time. Those things have absolutely no torque to get it rocking when stuck.
 
Last edited by a moderator:

Xado89

Skid Plates
Location
Ocala, FL
I love mud, That ford and a Chevy I owned were cleaned for like 6 hours after those trips, making sure everything was spotless again. The ford got stuck because I dropped down into some ruts from a dodge 3500 on tractor tires, lol
 

The Chech

First Fill-Up (of many)
Location
Kaneohe Bay
Well I finally got tired of the porn star stance the X had so i got around to fixing that problem and removed the smallest AAL
534192_3555923784079_1551687552_n.jpg

217911_3555927624175_2049249908_n.jpg
 

The Chech

First Fill-Up (of many)
Location
Kaneohe Bay
[video=youtube_share;OqXD6AU6N38]http://youtu.be/OqXD6AU6N38[/video]

Testing out my new dash mount to take videos seems to work well.
 

The Chech

First Fill-Up (of many)
Location
Kaneohe Bay
Well I used my iPhone and bought a 4$ window mount surprised how sturdy it was after dropping into the rut

And Kristen who's Rancho shock got melted yours or Emily's?
 

The Chech

First Fill-Up (of many)
Location
Kaneohe Bay
Tomorrow is gonna be productive got some goodies in the mail while I was gone for a week. Gonna replace my Center link and the TRE along with my brake pads as long as this monsoon decides to go away...
560885_3594194220816_1768108341_n.jpg
 

The Chech

First Fill-Up (of many)
Location
Kaneohe Bay
Well the rain finally stopped so work could be done. Got some new Duralast brake pads and started taking apart the steering as a whole since its gotten old and worn out. But i have to say it was a lot easier then I thought it would be every thing popped right out as it should. Just wish other things could have been this simple.....

And is anyone running these pads?
577006_3597266257615_951068795_n.jpg


And i was really surprised how easy it all went together
523813_3597250377218_2139472390_n.jpg


Old steering link
383514_3597233776803_1224379136_n.jpg
 

Xado89

Skid Plates
Location
Ocala, FL
Looks good buddy, great video. exceptional quality, but then phones outdo the actual product these days heh. Ohh I find the bad spots to, don't worry. haha previous pictures from truck sunk in hole =P
 

Kris&HerX

Bumpers Installed
Founding Member
Location
Boise, ID
You never did fix the one in the rear that you said was broken did you?

Nope, I haven't been able to. Both the rear shocks are pretty worn which is crazy considering all shocks aren't that old.

And as far as the Duralast brakes go, I think that's what I have on my truck. Did you get them with the lifetime warranty? If not take them back, go to AutoZone and get a set of those. As long as you have the vehicle you'll never have to pay for another set of brake pads.
 

The Chech

First Fill-Up (of many)
Location
Kaneohe Bay
Yeah thats where I got them. And how does that work life time warranty on pads? I mean they don't last forever (just really really long). And have you looked at rock auto for shocks there really cheap there like 20$ and since you said yours are failing :S
 

Kris&HerX

Bumpers Installed
Founding Member
Location
Boise, ID
Whenever the pads are done (worn), just take them back in for an exchange. Keep the receipt. They'll do all the paperwork and you'll have a new set. =) They don't switch from car to car (that's how they make their money because most people don't keep their cars longer than a couple of changes of the pads).
 

Kris&HerX

Bumpers Installed
Founding Member
Location
Boise, ID
Yep, My dad used to work for AutoZone, and made sure that I knew what stuff like that meant. Best of luck buddy.
 

Kris&HerX

Bumpers Installed
Founding Member
Location
Boise, ID
You know I would have been there. With Jenny. On the roof.

=( Guess I'll just have to show up in my mom's convertible Volvo while I'm home for Christmas.
 

The Chech

First Fill-Up (of many)
Location
Kaneohe Bay
Lol I won't be here for any holidays. Leaving in 3 weeks for Recruit training so it might be a long time before I make it back to Charlotte for any of the car meets but 2 days before I leave I'm going to uwharries fall jamboree for one last ride. It's gonna be make it or break it weekend I plan on come home with some thing broken :)
 

The Chech

First Fill-Up (of many)
Location
Kaneohe Bay
Installed my new Pioneer head unit to match my speakers I got a long time ago. Have to say it makes a huuuuge difference in sound quality just need an amp and subs now :D
542111_3650827476612_1274775863_n.jpg

310105_3650829476662_812339010_n.jpg



Finally got rid of this old thing just wouldn't making the cut
528715_3650830796695_1122075345_n.jpg
 
Top