- Location
- Glenside, PA
Last 2 seasons have been "meh" for me though. Makes me sad
TGPWS 7: New Year. See if we can wash the stink off.
- Thread starter Prime
- Start date
- Status
- Location
- Denver Adjacent
Ep1 of season nine was amazing. The rest of the season is shaping up nicely
- Location
- Allen, Texas
Anyone else show up in here, this thread in particular, and immediately feel EXTREMELY happy we have a no politics talk rule?
The world is nuts out there. Imma close myself off in here with the whiskey machine, all these bean bag chairs and, apparently, the eSports legend.
*opens someones graded comic book*
The world is nuts out there. Imma close myself off in here with the whiskey machine, all these bean bag chairs and, apparently, the eSports legend.
*opens someones graded comic book*
Hell yes. I spent about 3 hours yesterday working on issues related to one of my stations playing news reports. I walked to another floor to deal with another issue and first thing I said when I got to the control room was "please tell me you're taking sports"
- Location
- All over PA
BEEFY
I Smile when Gasoline Can Freeze
- Location
- Prince George, BC, Canada
I was going to use those comics to level the pinball machine.
- Location
- Ontario Canada
Was going to use those to shin the new kitchen cabinets
- Location
- Allen, Texas
Take the ones he hung on the wall. They are in hard plastic and might work better. He wont ever miss them.
Yup, just in time for the shiat storm.
BEEFY
I Smile when Gasoline Can Freeze
- Location
- Prince George, BC, Canada
OffRdX
Lockers Installed
- Location
- Port Orchard, WA
so much this
- Location
- Ontario Canada
Well just got the hidden winch plate for the Silverado today.
might try to install it next week when the temp is supposed to climb up to -1C
might try to install it next week when the temp is supposed to climb up to -1C
- Location
- Covington, Va
Just ordered a Zapp's tater chip pack after @TheCrabby1 turned me on to them.
They finally got it back in stock.
Got a guy coming to look at the wall tomorrow finally. Still gotta call a couple other guys. Looking forward to having this done so I can feel like I can work on other stuff. My truck still needs UCAs and the A/C fixed and the X needs a rear u-joint and t-case output seal.
They finally got it back in stock.
Got a guy coming to look at the wall tomorrow finally. Still gotta call a couple other guys. Looking forward to having this done so I can feel like I can work on other stuff. My truck still needs UCAs and the A/C fixed and the X needs a rear u-joint and t-case output seal.
- Location
- Burtonsville, Md
I'll send you some SPF 2 suntan lotion, wouldn't want you to get sunburned out there !!
- Location
- Ontario Canada
I’d rather you send beer and a heated garage
- Location
- Ontario Canada
- Location
- McMinnville, Orygun
ah one can always Plastic Spoons. Get those in take out orders..
Gonna go see how long the line is at the Whiskey machine. If dang line is long.. Gonna Sneeze and cough!!. That should clear out the Slackers. I working a powerful Thirst!!. Need me some feel good Blinker fluids.
- Location
- Denver Adjacent
https://www.amazon.com/dp/B000Y85RHE/ref=cm_sw_r_cp_apa_i_.e89FbQMZ35KQ
Something along these lines.
- Location
- Ontario Canada
Would love to have it activate of the switches I have in the cab of the truck already do you know of anything that would handle that kind of amps?
- Location
- McMinnville, Orygun
Bought a Warn Ti-9.5 Hitch mount winch Straight Warn Factory. ( Knew a fellow I trained, that was a Warn engineer )
One thing about winches, he told me and it stuck. If Bumper mounted, Have kill switch. So unit is dead. Told me of Issues, People would take a Cable drape over roof attach to rear bumper. Insert a Paper clip into socket And walk off. Was not a pretty site.. Reason for Kill switch inside. Till its needed
And be safe with the winch.. They can fling cable and bust up a Human body..
One thing about winches, he told me and it stuck. If Bumper mounted, Have kill switch. So unit is dead. Told me of Issues, People would take a Cable drape over roof attach to rear bumper. Insert a Paper clip into socket And walk off. Was not a pretty site.. Reason for Kill switch inside. Till its needed
And be safe with the winch.. They can fling cable and bust up a Human body..
- Location
- Ontario Canada
Oh. I am well aware of what can happen
i picked up a Runva 11 000 lb winch with synthetic cable. I ran a form of kill switch on the one in the X just looking for something a little different for the Silverado
OffRdX
Lockers Installed
- Location
- Port Orchard, WA
here I am refusing to go outside when it is below 40F
OffRdX
Lockers Installed
- Location
- Port Orchard, WA
This is a pic of my setup. I will see if i can find the order info for it.
Attachments
OffRdX
Lockers Installed
- Location
- Port Orchard, WA
@maillet282 found it
PAC PAC-500 500-Amp Relay Battery Isolator https://www.amazon.com/dp/B001YIPXR2/ref=cm_sw_r_cp_api_glc_fabc_ET89Fb3T5HJWQ
PAC PAC-500 500-Amp Relay Battery Isolator https://www.amazon.com/dp/B001YIPXR2/ref=cm_sw_r_cp_api_glc_fabc_ET89Fb3T5HJWQ
- Location
- Ontario Canada
Damn those things aren’t cheap
OffRdX
Lockers Installed
- Location
- Port Orchard, WA
no it wasn't, but it lets me use a switch in the cab to kill power to it. A manual "switch type" battery isolator will be much cheaper I imagine.
- Location
- Ontario Canada
Thats what I want. Looks like I will need to order one of those once the kitchen Reno’s are done.
- Location
- Allen, Texas
Exact same. All work stops in my shop (or anywhere) when its 42 or below. Just not doin it. Thats when i catch up on my TV.
Unless (as in the case of an old BMW I had) my car i drive every day breaks, Im not workin on shiat outside in that temps.
- Location
- Glenside, PA
Sissies.
I did a bumper swap in the snow, in January, in a campground parking lot.
- Location
- Allen, Texas
- Location
- Allen, Texas
- Location
- Glenside, PA
Because @jsexton and I decided to swap bumpers. He lives in Ohio, I'm in PA. We were wheeling that weekend and decided to do the swap then.
- Location
- Allen, Texas
Oh i would totally work in those conditions. All the more fun with someone to bitch about it with.
Id be in fo sho.
- Location
- Colorado Springs
That's what construction/shop heaters are for. I have one in the garage and have wrenched and done things when outside it is in the 20s. Inside it is in the mid to upper 60s.
- Location
- All over PA
I supervised lol
- Location
- Covington, Va
https://www.utzsnacks.com/apps/bundles/bundle/3496Tell me more.
Voodoo, Voodoo heat, Crawtator, Dillsboro and evil eye. 5x each. Much good. Gonna threaten the kids with snacking punishment....
- Location
- Allen, Texas
I wish. I dont have a shop at home, so i have to rent one. Its cheap ($325 a month for a 40x40) but its cavernous and difficult to heat. Its basically two boat storages, that lived briefly as an RV repair shop, and now houses my junk.
- Location
- Allen, Texas
Oh imma do this. Thanks!
- Location
- Denver Adjacent
- Status