kyter 2nd X

kryter

First Fill-Up (of many)
Location
Aurora Colorado
Kryter

Nissan

2014

Xterra

Pro4x

Blue




Hefty sliders
Maxterra rear bumber
OME rear spring.. modified '' alldog triple al
PRG shackle
bilstien 5125 rear shocks
SPC UCAs
Radflo ext trav coilovers w 650lbs spr
hefty al front bumper w 10500 winch
hefty full skids eng steel all else AL
M205 rebuilt regeared 4.11 arb locker
m226 rebuilt regeared 4.11


ovvHjbv.jpg

n2OzEAt.jpg

3AclHkd.jpg

byG8dax.jpg

vjHfY8E.jpg
 
Last edited:

IM1RU

Skid Plates
Supporting Member
Location
SLC, UT
Keep that hinge bolt good and lubed, every couple months give it a squeeze more, and also as per his instructions keep that bolt tight.
 

outback97

Wheeling
Supporting Member
Location
SLC, Utah
That setup looks awesome. Dave’s stuff is the best out there IMO.

One hell of a lever arm if you put much weight on that table though. With my luck one of my camping buddies would drop a heavy water container on that thing and bend something.
 

TerryD

Total Tease
Supporting Member
Location
Covington, Va
Y2vNJO3.jpg
5QOaMWJ.jpg
all the parts are gathered now if I had the time. 10 hr days and 7 days on call till next week..the weather better play nice next week

Exactly the setup I have. You'll be very happy with them! With those spring rates, I pulled my front swaybar and while I wouldn't want to thrash around Laguna Seca for hours on end, it has done excellent on all the multi-hour interstate trips we've taken it on.
 

kryter

First Fill-Up (of many)
Location
Aurora Colorado
fhdNPbb.jpg
458id8J.jpg
0HleijI.jpg
8lcT79b.jpg


Progress..had it aligned the next day and it tracks like a train. removed both sway bars and the ride is still great. 285s are probably next week. Damn I have a lot of spare parts on my garage floor.
 

kryter

First Fill-Up (of many)
Location
Aurora Colorado
installed a set of timbrem off road bump stops in the rear of the 14 bye bye rubber brick ..going to blackout the hood just waiting on a felt sqweeegee
 

TerryD

Total Tease
Supporting Member
Location
Covington, Va
took me most of the day just to mount a arb compressor in front of the air box. still need to wire it up wish me luck
Do you have pictures? I've considered putting mine there but I'm not sure it'll live long with the mud out here on the east coast.
 

kryter

First Fill-Up (of many)
Location
Aurora Colorado
installed the 6 relay control system,,, what a a bitch.. but its in... had to extend the main lead to the battery. mounted the relay box driver side under the dash. Then fished the 6 conductor cable to the over head console ..added a fuse tap for the acc wire and checked, ufcker works and I have nothing connected to it lol till tomorrow
 

kryter

First Fill-Up (of many)
Location
Aurora Colorado
wiring fun .. Ran a new harness for the fog lights, On when I say not Nissan.. also bypassed the roof boobs so they turn on when I want. Put the trasharoo on for a weekend trail run /camping trip .... thanks again secret Santa .. cheers bitches! bourbon will be had
 

kryter

First Fill-Up (of many)
Location
Aurora Colorado
Kryter

Nissan

2014

Xterra

Pro4x

Blue




Hefty sliders
Maxterra rear bumber
OME rear spring.. modified '' alldog triple al
PRG shackle
bilstien 5125 rear shocks
SPC UCAs
Radflo ext trav coilovers w 650lbs spr
hefty al front bumper w 10500 winch
hefty full skids eng steel all else AL
M205 rebuilt regeared 4.11 arb locker
m226 rebuilt regeared 4.11


ovvHjbv.jpg

n2OzEAt.jpg

3AclHkd.jpg

byG8dax.jpg

vjHfY8E.jpg
 
Top