Guys.
It seems some people dont fully understand the purpose of leaf springs and shocks.
The purpose of a leaf spring is to provide support for a vehicle. It also provides for a smoother ride absorbing any bumps or potholes in the road.
A shock absorber is a mechanical or hydraulic device...
Causes of Code P0101
Dirty, obstructed, or faulty mass air flow sensor
Damaged or disconnected air intake boot (snorkel)
Vacuum leak
Clogged or improperly installed air filter
Clogged catalytic converter / restricted exhaust
1. Replace air filter
2. Clean maf sensor ( or replace )
3. Check...
I've been running Falken Wildpeak AT3W tires in factory Pro4X sizing for a couple years and have been pleased with them.
So far, they are wearing well (rotate every 7000 miles) , handle very well in wet weather, tackle Georgia mud just fine and are fairly quiet for an aggressive all terrain...
7" Harbor Freight Buffer $39.00 (even less with a coupon)
3m headlight compound
Roll of painter's tape to mask off everything around your headlamps.
Meguiars headlight coating to be used in preventing future discoloring...
It's difficult to quote a part price without an idea of your Xterras year model.
Follow this link: https://www.courtesyparts.com/
Ask your local dealership to price match
^^^^^^
Correct.
As a side note, the tires on my Xterra S 4x4 were upgraded to the 265-75-16 which is factory on the Pro4X.
My speedometer was tested to be accurate by checking with a GPS.
Are they still making Star Wars movies?
Like most kids in the 80's, I eagerly followed the Star Wars movies .
However, with every new release the story seemed to fail. It seemed as if the movies took on a somewhat kinder, more political nature.
Eventually, I stopped spending my cash trying to...
When stopped and idling with your heater on. are you experiencing cold air being blown through your vents.
If so, check your radiator overflow tank the next time your engine is cool and your coolant system is without pressure.
Fix: Fill your overflow tank to the proper level . A simple fix...
Ratchet wrench test of todays major brands.
Note, these tests exceeded the practical use of the wrenches tested.
If I needed to torque an item over 200ft/lbs I would use a 1/2 drive wrench.
There was a time in which names such as "Craftsman" reflected "Made in the USA" with a good warranty.
Today, so many of our tools are made abroad that it's difficult to tell the good Asian tools from the bad.