Recent content by ChillyX

I think they pretty much replaced the entire wiring harness as you can see that large bundle coming to the firewall got chewed up halfway through I checked and the brakes are plugged in but honestly I don’t think it’s a wiring issue More detailed story goes like this. I drove to work fine, and...

So a squirrel chewed through my wiring harness and i had a tow truck take my x to the dealership. Now i have to push the shift lock button with a key to get it out of park. What could have been damaged as i wasn’t available when they towed and the car was dragged. Thanks

Ive replaced the front rotors and pads with raybestos. Also picked up a tube of sil glide which i applied to slide pins as well. Everything seems peachy. Thanks for all the info guys!

I have an auto and use lower gears pretty often. Ill take the advice and put on the raybestos premium pads. Would the heavy duty rotors be overkill? I can tell that mine are warped after just having them turned so ill replace them (the guy that turned them told me they probably would warp...

The rotors were glossy and turning them didnt help. Ive also checked the dust shield and it had plenty of clearsnce. Im thinking ill get some good grease and tonight ill lube again and hit the slide pins with pb to make sure they are both moving. Has anyone upgraded rotors to the ones with the...

I have a friend at work that has a gazillion brewery stickers on his rig but only ones that the rig has been to. Stickers are for fun. Use em if you like em.

I dont remember which pad i used but i know i avoided metallic and bought a more expensive pad especially since i upgraded tire/wheel size. Im more concerned with the other noises that have become more noticeable. Could a caliper failure be to blame? It seems to be only the front driver that...

im having issues with the brakes and i avoid taking my trucks to a shop if i can help it so hopefully someone can help me here. My brakes started squeaking so i replaced the pads that were on when i bought it even though they were only half worn. It still squeaked. I had the rotors turned...

You just reminded me that i pulled the fender off recently so thats probably it. Thank you

So i replaced my battery and now my wipers are mixed up. If i pull the lever back the windshield gets sprayed and the rear wiper moves. If i push the lever away the rear window gets sprayed and the front wipers move. Anyone have a suggestion on how to correct this?

Tire size:285/70/17 Tire make: falken wildpeak a/t Wheel: level 8 mk6 17x8 Backspacing: 4.5 Spacer: none Cutting: slight bending of fenders behind plastic Other mods: melt mod on front and back of wheel well. Cam bolts adjusted to shift tire foreward. Spc uca’s to adjust alignment. Lift: 1 1/2”.

When removing the drivers side uca the rear bolt cannot be removed and it seems pretty standard to cut it and replace it from the other side. During the process of replacing my uca’s i found that my angle grinder wouldnt fit in the available space to cut the bolt. I was able to remove that...