Maillet’s New Ride

maillet282 · Dec 7, 2019

Well. Since I’ve sold the X and am still planning on hanging around here might as well start a build thread for this

Year: 2017
Make: chevrolet
Model: Silverado 1500 z71 True North Edition
Vehicle name: TBD

Milage when bought 73 000 km(45 000 miles)

so far not too many mods that I’ve done. Mostly doing research

exterior:
-Fender flares unsure of what brand
-Armour Flex trifold tonneau cover

-17” Procomp rims ( still looking for model and backspacing)
-265/70/17 BFG KO2 Also have dedicated Toto winter tires

-Some sort of levelling kit
- Driver Side Under Cover Swing Case

-SDHQ A pillar light brackets with a pair of Trux LED light pod with amber strobe side shooters

-Fab light bar mounts for inside the grill
- Magnum low profile headache rack ( https://magnumtruckracks.com/shop/truck-racks/magnum-all-aluminum-low-pro-truck-rack )
-Rough Country winch plate with Runva 11 000lb winch

interior:
-Installed 2 car seats and a high back booster
-weather tech floor mats
-Cab Bag

- Trauma bag ( Advanced First Aid Kit)
- Uniden Bearcat CB
electrical:
-added switch pod and control box

In Progress (parts received)
- fire stick 2’ antenna and Coax. ( to be attached to the headache rack. Have a temporary magnet mount on the roof for the moment)

To do:
- Rear bumper with recovery points
- aux reverse led lights lights

TerryD · Dec 7, 2019

Nice looking truck! I've always liked that color on those.

maillet282 · Dec 7, 2019

TerryD said:
Nice looking truck! I've always liked that color on those.

thanks

so far, the wife has approved of the first mod

I will be getting the blazer Wireless Management system. this will allow me to install some lights on this thing without having to permanently cut a hole somewhere in a dash that is already pretty busy

Fromfrontier2Xterra · Dec 7, 2019

What size tires can you fit on that thing?

maillet282 · Dec 7, 2019

Fromfrontier2Xterra said:
What size tires can you fit on that thing?

still trying to figure out what the stock rim size on this thing is. I am reading between 18" rims to 20" rims are stock but the previous owner threw on some 17" procomps so I am still figuring this out.

maillet282 · Dec 8, 2019

Fromfrontier2Xterra said:
What size tires can you fit on that thing?

so come to find out the stock size for this truck was actually 265/70/17 with 17x8 rims with a offset of +24mm

now with that figured out I can research what's the biggest size tire I can get on this thing with out needing to trim some fenders or to adjust backspacing( don't have the $$$ for new rims right now)

also found out that this thing has these adjustable shutters ( active shutter system) that if removed with basically throw the truck into limp mode. looks like i need to break out some fab skills in the spring and see if i can custom fab some mounting brackets in order to install a single row ( possibly a double row) 30" curved light bar in front of these shutters and push the light bar in in the actual grill. this GM forum is very poorly organised. the modded vehicle has no subject division so i need to search through 371 pages of carious threads to find what I am looking for and want to read ( I've been saving specific threads to speed things up)

I will also need to break out my fab skills to be able to have a hidden winch in the front bumper. definitely spoiled with XN for the last few years

harryron · Dec 11, 2019

maillet282 said:
so come to find out the stock size for this truck was actually 265/70/17 with 17x8 rims with a offset of +24mm

now with that figured out I can research what's the biggest size tire I can get on this thing with out needing to trim some fenders or to adjust backspacing( don't have the $$$ for new rims right now)

also found out that this thing has these adjustable shutters ( active shutter system) that if removed with basically throw the truck into limp mode. looks like i need to break out some fab skills in the spring and see if i can custom fab some mounting brackets in order to install a single row ( possibly a double row) 30" curved light bar in front of these shutters and push the light bar in in the actual grill. this GM forum is very poorly organised. the modded vehicle has no subject division so i need to search through 371 pages of carious threads to find what I am looking for and want to read ( I've been saving specific threads to speed things up)

I will also need to break out my fab skills to be able to have a hidden winch in the front bumper. definitely spoiled with XN for the last few years

What is these shutters you are speaking about and what is their purpose?

maillet282 · Dec 11, 2019

It’s these flaps that adjust with speed to help aerodynamics at highway speeds. Plus on cold days they limit the air going through the rad

maillet282 · Dec 16, 2019

well drove the 2 hours to Ottawa to do a some costco shopping. was easier to do alone with no kids then with the whole family. specially with Xmas being so close and people tend to loose their minds this time of year.

driving the 2 hours I averaged 20 MPG. was so suprised and the diffrence in fuel economy.

also ended up ordering one of these

and am also about to order a set of weatherTech floor mats

maillet282 · Dec 19, 2019

Updated the OP with a couple new photos

maillet282 · Dec 22, 2019

Added more pictures of the cab bag and weather techs installed

relocated the jack and tire tools in the cab bag to make it easier with the 3 car seats. It’s just a really small bottle jack that came with the truck. Hey will most likely end up buying a bigger bottle jack and keep it stored in the box with the rest of the tools but that’s a futur me expense.

maillet282 · Jan 4, 2020

Just finished sorting out some medical supplies that I had kicking around the house. So packed myself up a truck trauma bag

going to be ordering a small brown pouch to attach to the side of it that will hold some triage tags, flagging tape, window punch and some sort of seat belt cutter.

TerryD · Jan 5, 2020

That's a nice kit! I need to go thought my FAK and get the OE Xterra junk out of it and fill it with better quality stuff. I also need to have my wife and her ER nurse friend add some goodies to it.

maillet282 · Jan 5, 2020

TerryD said:
That's a nice kit! I need to go thought my FAK and get the OE Xterra junk out of it and fill it with better quality stuff. I also need to have my wife and her ER nurse friend add some goodies to it.

With the bag, and everything in it there is probably close to $2-3000 right there

TerryD · Jan 5, 2020

maillet282 said:
With the bag, and everything in it there is probably close to $2-3000 right there

Yeah, I figured it would be up there. Good quality stuff is expensive. Our FAKs have been picked over for years now. When the wife worked at a nursing home, she'd bring home the things that she checked out and only used some of (bandages, ect, not meds) and we built up a decent kit. It's been years now since she worked so it's pretty rough shape.

Now we'll have to do some shopping to build them back up. She usually carries our original kit. I added a BROG Medium IFAK to my X's OE FAK spot and it'll hold about 3x what the OE pouch would. I gave the pouch to a buddy with an X. Now I need to stock it up good and be good to go for the year.

maillet282 · Jan 5, 2020

TerryD said:
Yeah, I figured it would be up there. Good quality stuff is expensive. Our FAKs have been picked over for years now. When the wife worked at a nursing home, she'd bring home the things that she checked out and only used some of (bandages, ect, not meds) and we built up a decent kit. It's been years now since she worked so it's pretty rough shape.

Now we'll have to do some shopping to build them back up. She usually carries our original kit. I added a BROG Medium IFAK to my X's OE FAK spot and it'll hold about 3x what the OE pouch would. I gave the pouch to a buddy with an X. Now I need to stock it up good and be good to go for the year.

Just to give you an idea. Just for the bag and internal pouches

TerryD · Jan 5, 2020

Here's the bag I have in the X. The other kit is a tackle box from Wal-mart.

https://www.blueridgeoverlandgear.com/products/first-aid-ifak-bag-medium

maillet282 · Jan 5, 2020

TerryD said:
Here's the bag I have in the X. The other kit is a tackle box from Wal-mart.

https://www.blueridgeoverlandgear.com/products/first-aid-ifak-bag-medium

I always look at those every time I go to BROG website. But I can’t bring myself to spend that much for those pouches right now since I still have the other half of that CTOMS bag as well as a Blackhawk SO med bag that are collecting dust in the basement still

TerryD · Jan 5, 2020

maillet282 said:
I always look at those every time I go to BROG website. But I can’t bring myself to spend that much for those pouches right now since I still have the other half of that CTOMS bag as well as a Blackhawk SO med bag that are collecting dust in the basement still

I bought it specifically because it fit the X's factory location and is a very nice bag. They're pretty local to me so I go visit occasionally and chat with Matt and Adam. Nice folks! I have a few more of their things as well I've nabbed over time. But I totally get using what you have rather than spending more money for something new.

maillet282 · Jan 20, 2020

Swing case arrived. Ordered it Thursday night and it got fed Ex’ed out and arrived today. Will post up install pics tomorrow ( if the weather holds up

maillet282 · Jan 21, 2020

Under cover swing case installed. Easier then I imagined. Comes with 6 self tapping screws (might change the. Out this summer who knows). Already loaded this one up with a pair of cold weather work gloves, 2 steel shackles and 1 gator jaw, a recovery strap, rear hitch shackle tampon, tire compressor and lockable pin for the hitch and my halligan vehicle access tool This is all locked in the actual case and I will be adding another lock to the bracket to lock the whole assembly onto the truck

harryron · Jan 22, 2020

maillet282 said:
Under cover swing case installed. Easier then I imagined. Comes with 6 self tapping screws (might change the. Out this summer who knows). Already loaded this one up with a pair of cold weather work gloves, 2 steel shackles and 1 gator jaw, a recovery strap, rear hitch shackle tampon, tire compressor and lockable pin for the hitch and my halligan vehicle access tool This is all locked in the actual case and I will be adding another lock to the bracket to lock the whole assembly onto the truck

View attachment 12609 View attachment 12610

They need to make those long enough and out of steel so you lock up a long gun in there and not have to worry about them being stollen.

maillet282 · Jan 22, 2020

harryron said:
They need to make those long enough and out of steel so you lock up a long gun in there and not have to worry about them being stollen.

They have some that are the length of the box. But are still made in plastic. This still wouldn’t work to lock up firearms in Canada. Plus I am still a bit doubtful on how water tight these really are I would rather build a secure lock up and have it placed under the rear seats. More out of sight out of mind kind of thing. But gun laws are about to get a shiat kicking up here in Canada anyways. So that is more a watch and shoot for the moment. ( see what I did there lol). Some politicians want to go the route New Zealand has gone with a full semi auto ban as well as banning pistols.

TheCrabby1 · Jan 22, 2020

That's nice............ Is that the spot for a pad lock coming thru the hinge bracket itself ? Did you do this in stereo or was mono enough ?

maillet282 · Jan 22, 2020

TheCrabby1 said:
That's nice............ Is that the spot for a pad lock coming thru the hinge bracket itself ? Did you do this in stereo or was mono enough ?

Yes there is a place for a padlock to lock the case to the mounting bracket. As for the mono/ stereo content I am guessing your asking if I installed 1 or 2 of the swing cases. So far I’ve only installed the drivers side. Not sure if I want to buy the passenger side box or not

TheCrabby1 · Jan 22, 2020

maillet282 said:
Yes there is a place for a padlock to lock the case to the mounting bracket. As for the mono/ stereo content I am guessing your asking if I installed 1 or 2 of the swing cases. So far I’ve only installed the drivers side. Not sure if I want to buy the passenger side box or not

I'm old school or [ just old] I should have said 1 or 2. LOL Are they a universal mount [ either side ] just curious. I figure I'm driving alone 95% so I'd want one for the passenger's side just to keep the weight distributed evenly especially with chain's shackle's etc,etc.....

maillet282 · Jan 22, 2020

TheCrabby1 said:
I'm old school or [ just old] I should have said 1 or 2. LOL Are they a universal mount [ either side ] just curious. I figure I'm driving alone 95% so I'd want one for the passenger's side just to keep the weight distributed evenly especially with chain's shackle's etc,etc.....

They are pretty much vehicle specific. And they have a driver side and passenger side in order to mount the bracket and be able to open the case

maillet282 · Jan 25, 2020

Well accomplished the first recovery with the new truck tonight

maillet282 · Jan 30, 2020

Well kind of need help deciding what a pillar light bracket to go with

I have 3 options currently:
1.) https://sdhqoffroad.com/collections...-a-pillar-light-mounts?variant=31409663148132

these are the most expensive with shipping and conversion to CAD and easy to install

2.) https://www.ragofabrication.com/collections/chevy/products/2014-2019-chevy-silverado-ditch-brackets

these are a bit more difficult to install but will end up costing under $200 for the item and shipping and conversion to CAD

3.) say ufck it and build my own.( would most likely end up with something similar to option 1.) cost would be minimal and the only real expense is to get them powder coated. But I would need to wait until spring to fab them up and with a deployment looming I don’t think I have the time available to get it done this year.

maillet282 · Feb 16, 2020

well ended up ordering the SDHQ Ditch light brackets

now working on my lighting plan. considering the wife doesn't want me cutting into the dash quite yet. ( she would like me to pay it off first)

here is what I am thinking for lighting plan

- ditch light with side shooter amber strobe lights
- behind the grill 30" single Row LED Light bar with Rough Country brackets ( comes as a kit including light bar https://www.roughcountry.com/gm-150...tml?find=2017-chevy-silverado-1500-4wd-374174)
- looking to order another traffic Advisor light bar ( came in real handy in the X, specially when stopped at accidents https://www.amazon.ca/LED-Strobe-Warning-Light-Bar/dp/B07H97F234/ref=sr_1_19?keywords=36"+amber+emergency+strobe+light+bar&qid=1581886725&sr=8-19)
- adding something like these strobe light pods on top of the Traffic Advisor for extra strobe ( https://www.amazon.ca/XTAUTO-Emerge...rds=amber+strobe+light&qid=1581892975&sr=8-78)
- Rear facing flush mount LED pods to rear bumper ( Something like this https://www.amazon.ca/Nilight-Light-Driving-Lights-Warranty/dp/B01MQSWG2I/ref=sr_1_16?crid=1ATKTLUK2XABP&keywords=flush+mount+led+lights&qid=1581893144&sprefix=Flush+mount+LED+,aps,190&sr=8-16)

and for switches the end game will be something similar to what i did to the X

Fromfrontier2Xterra · Feb 16, 2020

Excited to see.

maillet282 · Feb 17, 2020

Ok. The last traffic advisory bar I had rattled like a MOFO in the X. Not sure if it’s how I mounted it or if it was other noise from the rattling around. Need to figure a way to attach it so it’s solid enough that nothing will rattle around.

TerryD · Feb 17, 2020

Traffic advisory bar?

TerryD · Feb 17, 2020

Traffic advisory bar?

maillet282 · Feb 17, 2020

TerryD said:
Traffic advisory bar?

https://www.amazon.ca/LED-Strobe-Wa...gency+strobe+light+bar&qid=1581886725&sr=8-19

TerryD · Feb 17, 2020

maillet282 said:
https://www.amazon.ca/LED-Strobe-Warning-Light-Bar/dp/B07H97F234/ref=sr_1_19?keywords=36"+amber+emergency+strobe+light+bar&qid=1581886725&sr=8-19

Use it for white-outs?

maillet282 · Feb 17, 2020

TerryD said:
Use it for white-outs?

I am a bit of a shiat magnet with my specific set of skills. This just adds another layer of visibility. Plus with the slow down and move over laws regarding emergency vehicles and road workers. This helps to alert people that something is going ahead

maillet282 · Feb 23, 2020

Ended up installing a set of WeatherTech in Channel window deflectors

I ended up breaking the passenger front deflector. So I have 3 of 4 installed. Just emailed WeatherTech to see if they can send me another one on warranty.

maillet282 · Feb 27, 2020

Ok just found the perfect switch mounting area. I will loose the 12V cig lighter/power outlets but in this truck there are 2 USB outlets and a 110v plug inverter all in the same place

maillet282 · Mar 7, 2020

Well added a switch pod today. Took about 2 hours total. ( has issues getting things passed through the firewall. But got it done)

still need to hook up the + and - and then to add the light accessories.

Now for the pics
Before

During the install

After

Maillet’s New Ride

If you bleeding, Imma fix you

Total Tease

If you bleeding, Imma fix you

I bought a Taco

If you bleeding, Imma fix you

If you bleeding, Imma fix you

The Grumpiest of Mid-Westerners

If you bleeding, Imma fix you

If you bleeding, Imma fix you

If you bleeding, Imma fix you

If you bleeding, Imma fix you

If you bleeding, Imma fix you

Total Tease

If you bleeding, Imma fix you

Total Tease

If you bleeding, Imma fix you

Total Tease

If you bleeding, Imma fix you

Total Tease

If you bleeding, Imma fix you

If you bleeding, Imma fix you

The Grumpiest of Mid-Westerners

If you bleeding, Imma fix you

I Smell Fishy

If you bleeding, Imma fix you

I Smell Fishy

If you bleeding, Imma fix you

If you bleeding, Imma fix you

Attachments

If you bleeding, Imma fix you

If you bleeding, Imma fix you

I bought a Taco

If you bleeding, Imma fix you

Total Tease

Total Tease

If you bleeding, Imma fix you

Total Tease

If you bleeding, Imma fix you

If you bleeding, Imma fix you

If you bleeding, Imma fix you

If you bleeding, Imma fix you