GB PENDING: InSain Fab 1st & 2nd Gen Tax Season Group Buy ~ Starts 2/1 - 3/15, 2015

InSainFab

Bought an X
Location
Thornton CO
Starts 2/1/15 and orders will continue to be taken until 2/15/15. You will have up until 3/15/15 to make your payment in order to get everything out before GoneMoab2015.

Prices that are in BOLD below represent the current discount tier that product has reached.
6019cc30007c013264457a163e74bed5.gif



Untitled_zpsxldimqve.png

~Orders DO NOT Include Shipping
~DEDUCT $70 for RAW/BARE
~Add $40 to add 4 Gal or 2+2 Gal Rotopax Brackets on Rear Tire Carrier (Does not include Rotopax or Rotopax Mounts)
~Add 22" bar in front plate bumper ADD $135
~Add a set 3" or 4" Pods for Fog Lights in the front bumper, including lights ADD $75
~Add QUAD 3" lights to the front bumper for $140
~Add a low amp single or double harness $20
~Add Factory Fog Light Holes $100

~Add flush mount HOLES ONLY to Rear Corners ADD $40
~Add flush mount holes including lights ADD $80



CONFIRMED List (Products will ship in this order):

$$: Rear Bumper, Standard Sliders (RAW)
$$: Rear Bumper w/ Rotopax Brackets
$$: Rear Bumper (RAW)
$$: Rear Bumper w/ Rotopax Brackets
$$: Standard Sliders (RAW)
$$: Standard Sliders (RAW)
$$: Front Plate Bumper w/ Hoops and Quad Fog Lights and Red Shock Skids
$$: Rear Bumper w/ Rotopax Brackets & Rear Corners
$$: Rear Bumper w/ Rotopax Brackets
$$: Front Tube/Diamond Plate Bumper w/ 4" LED's, Rear Bumper & Rear Corners
$$: Front Plate Bumper, Factory Fog Holes, Headlight/Grille Hoops, 22" Flood LED (Add Flood Reflectors to make bar 100% Flood) Need to Add KC Covers
$$: Rear Bumper and Red Shock Skids
$$: Rear Bumper w/ RotoPax Brackets and Red Shock Skids
$$: Rear Bumper w/ RotoPax Brackets (RAW)

$$: Rear Bumper, Rear Corners
$$: Rear Bumper w/ Rotopax Brackets
$$:
Rear Bumper w/ Rotopax Brackets

$$: Rear Bumper and Black Shock Skids
$$: Rear Bumper
$$: Sliders (RAW)
$$: Rear Bumper w/ Rotopax Brackets (2-2gal.), Front Slotted Bar
$$ Rear Bumper w/ Rotopax Brackets (RAW)
$$: Rear Corners and Black Shock Skids
$$: Sliders
$$: Rear Bumper NO Carrier
$$: Front Plate Bumper w/ Single Spot Lights (RAW)
$$: Sliders (RAW)
$$:Rear Corners (RAW)
$$: Front Plate Bumper w/ 22" Bar and Quad 3" Lights, Rear Bumper w/ Rotopax Brackets (RAW)
$$: Rear Bumper w/ Rotopax Brackets and Red Shock Skids

$$: Rear Corners
$$: Front Plate Bumper w/ 22" Bar and Quad 3" Lights
$$ Jason Wellman: 1st Gen Rear Bumper
$$ J Everett: Front Plate Bumper w/ Holes for 22" LED, 3" Fogs and Factory Fogs (RAW)
$$: Front Plate w/ Quad Lights and Rear Bumper w/ Rotopax Brackets

$$: Rear Carrier w/ Rotopax Brackets
$$ 02Xterra: 1st Gen Rear Carrier
$$ Firefighter4607: 1st Gen Sliders (RAW)
$$: Rear Corners
$$: Rear Bumper w/ Carrier, Rear Corners w/ Lights and Sliders
$$ Trexterra: Front Tube/Diamond Plate w/4" Fogs
$$ kaytiejean05: Rear Bumper w/ Carrier

: Rear Bumper w/ Rotopax Brackets and Rear Corners payment info sent
Mike Nichols: Rear Corners w/ Flush Mounts payment info sent
: Rear Bumper w/Rotopax Brackets payment info sent
Reshmax00: 1st Gen Rear Bumper (RAW) payment info sent
: Rear Bumper w/ Rotopax Brackets payment info sent
: Rear Bumper w/ Rotopax Brackets payment info sent
: Front Plate Bumper/No Hoops w/ Quad 3" Lights, Rear Carrier w/ Rotopax Brackets, Rear AL Corners w/ Lights payment info sent
Fixitguy: Front Plate Bumper w/ Factory Fog Holes, 22" Light Bar w/ 2 Lamp harness and Rear Carrier w/ Rotopax Bracket payment info sent
mudchet: Rear Bumper payment info sent
schmidt1894: 1st Gen 40" Light Mounts payment info sent
: Rear Carrier w/ Brackets payment info sent
cgregg: Front Plate Bumper w/ Factory Fogs and 22" Light Bar payment info sent
Gentsjack7: 1st Gen Rear Bumper payment info sent
DC xterra: 1st Gen Rear Bumper w/ Rotopax Brackets and 40" Light Mount payment info sent
: Rear bumper w/ Rotopax payment info sent
SpongeX: Rear bumper w/ Rotopax (2 CB Tabs) payment info sent
Boogieman:
1st Gen Rear Bumper payment info sent
Possum4757: 40" Light Mounts payment info sent
: Front Plate Bumper w/ 3" Holes payment info sent
: Rear Carrier and Black Shock Skids payment info sent
: Front Plate w/ Quad 3" and 22" Light Bar, Rear Carrier w/ Rotopax Brackets and Red Shock Skids payment info sent
: Rear Corners payment info sent
Malin_Rebate: 1st Gen 40" Light Mounts payment info sent
: Sliders payment info sent
________________________________________________________________


GB DETAILS:











  • Starts 2/1/15 and orders will continue to be taken until 2/15/15. You will have up until 3/15/15 to make your payment in order to get everything out before GoneMoab2015.

  • Payment: Once opened you will receive an Invoice for your confirmed order. We accept CC and Paypal for an extra 3% and Chase QuickPay is free. If you want to send a check, that's fine too, but your shipment would be delayed until funds clear.

  • 100% of your order total will be due upon receipt of your invoice. However, you will have up until 3/15/15 at midnight MST to pay in full. This is due to fairly normal lead times (meaning you're not waiting 6+ months like GB's in the past) and it can add a lot of issues on our end with deposits and extra payments when ready to ship.

  • We are offering a tiered discount structure for each item. The more orders, the better the discount. Please understand that companies that are able to cut their prices in HALF for Black Friday as an example can sometimes mean that they are killing it with a high profit margin the rest of the year. That is not the case with InSain. These prices were made with bulk materials orders in mind, long hours and a lot of volunteered shipping help.

  • CONFIRMED LIST: is for people that are 100% IN; funds available, set on ordering as we are using this for the tiered discount. In other words, NO BACKING OUT!

  • CONFIRMED List for AL Corners at $550 shipped: is for people that are 100% IN; funds available, set on ordering IF the price reaches the $550 shipped tier.

  • If you are one of the first ones to order and we reach a better discount tier come close, every one will be refunded the appropriate amount for the tier discount that product reaches. I.E. if you are the 1st to order a rear bumper and pay $700 but by the time the GB closes on 3/15 there are 10+ orders, you will receive a refund for the discount difference.

  • Shipping will be calculated and will be sent in a separate invoice. The rear bumpers should be less than $100 shipped to the CONUS as they just shipped one to FL for $95. Items will be shipped to individuals in order of the confirmed list and as ready.

  • CAN Orders will come with a Declaration of Origin in order to help facilitate the import process on your end.

  • If you order RAW; product will be less expensive, shipping will be less expensive and you will have faster lead times.


  • We would like to have 100% of the powder coated items shipped by 4/5/15 depending on confirmed list, but our goal is to have 100% of them to you, with enough time to install before GoneMoab2015!

    ____________________________________________________________________________________________​










AVAILABLE PRODUCTS

~All products can come RAW or Powder Coated and all aftermarket light bars are from ExtremeLEDLightBars.com~











  1. Front Plate Bumper (Custom Options: Integrated 22" Light Bar, 3" and 4" Fog Light Replacement) Pictures coming end of week 1/12/14
    ~2 Recovery Points
    ~Winch Cradle
    ~Factory Fog Light Holes
    ~Headlight/Grille Hoops
    ~1/8" Radiator Skid
    2ndGenFrontPlate_zps4c95b359.jpg

    10934320_10152982638658926_1380505339_n_zpsvub68xao.jpg
  2. Front Prerunner Tube
    ~2 Recovery Points
    ~1/8" Radiator Skid
    ~Flat Plate Covered Corners
    10941293_10152982638903926_1496375191_n_zpsocycgje7.jpg
    10947657_10206061326991412_97050070_n_zpskivuifox.jpg
    10984703_10206061326671404_1362109960_n_zpsbxjogjzz.jpg
  3. Front Tube w/ Diamond/Flat Plate Front Bumper (Custom Options: Integrated 22" Light Bar, 3" and 4" Fog Light Replacement)
    ~2 Recovery Points
    ~Winch Cradle
    ~Factory Fog Light Holes
    ~1/8" Radiator Skid

    10703590_685384128205932_7932502328843778135_n.jpg


  4. Rear Tire Carrier (Custom Options: RotoPax Brackets)
    ~2" Receiver
    ~Hi Lift Mount
    ~CB antenna
    ~2-Recovery Points
    ~License Plate Bracket
    ~None, 1" and 2" Body Lift Compatible
    ~up to 35" Tire

    10625123_805944062761481_3239683017657528541_n.jpg


    4 Gal. ROTOPAX Brackets (Optional):
    15210_802477743127129_1381327651968914461_n.jpg

    10885153_802477943127109_7216949802963029611_n.jpg
  5. Front Slotted Light Bar
    photophp_zpsf40c96af.jpg

    1111_zps11a824ed.jpg


  6. Front 40" Light Bar Mounts
    40InchXterraMount_zps9454a77c.jpg


  7. Sliders
    ~1/8" 2x2 square
    ~ .120 wall tubing.
    ~ 1/8" tread plate step

    1926756_686184551423116_409522293179349319_n.jpg

    10294362_686184484756456_6249479354070952586_n.jpg

    10906453_807307795977457_726073457971928928_n.jpg


  8. Rear Light Bar
    10849759_800447159996854_5242811399961215622_n.jpg


  9. Rear AL Corners (Custom Option: 4" Flush Mount Pods)
    ~1/8" or 11 Gauge Steel is 5.0lb/sf.
    ~3/16" or 7 Gauge Steel is 7.66lb/sf.
    ~1/4" or 3 Gauge Steel is 10.21lb/sf.
    ~Corey uses 3/16" 5052 Grade Aluminum to build the corners at 2.7lb/sf.

    10893723_10205801813143728_1824438027_n.jpg
Thank you for your time and please post up any questions you may have.
 
Last edited:

metzican

Suspension Lift
Location
Lafaytte, la
This is awesome.

This is INSAIN. Now what to do for a man who has all his orders in already?? hmm, besides that special crazy one that people might not get... And he might not know how to get it done right. I will think of something. For those of you who wish you had a rear bumper, or a front, or hell even a light bar. Jump and jump hard on this. There is not a single item listed here that I would not of bought if it was available at the time I installed everything on my X.
 

InSainFab

Bought an X
Location
Thornton CO
Prices would be nice.
  • I am not sure if there will be a set price or a tiered discount but I will post more details when I have them available.
  • If a tiered discount and in the interest of lead times, members would receive refunds for the tier reached if they are one of the first to order and paid more, etc.
This might be it. It is on there FB page from a while back. Now if this is wrong feel free to delete this post to stop confusion.
Thanks for all the awesome support!!! We did build that but we have a different style in mind this time around for production purposes:) We will have photo's soon!!
 

J Everett

Suspension Lift
Founding Member
Location
Houma, LA
Whew! $1000 is gonna be tough to swing. I'll have to discuss it with my missus. I guess put me down as tentative for a front plate bumper, 2nd gen. Any customization options, (hoops, front receiver hitch, etc)?
 

InSainFab

Bought an X
Location
Thornton CO
That includes headlight/grille hoops, 1/8" rad skid. Custom light options, etc. Also, to keep with the rules, we are not posting other orders, but we wanted to make sure that you all get the same discount. So if I have 10 orders elsewhere for the bumper we will honor the 10+ price here!! Thank you for the support!!
 

brambleheart

Test Drive
Location
Colorado
How far over does the tire carrier hold the tire? Would a rear mounted tire obscure the backup camera on the 2013+ Pro4x's?

And is local pickup an option?
 

InSainFab

Bought an X
Location
Thornton CO
How far over does the tire carrier hold the tire? Would a rear mounted tire obscure the backup camera on the 2013+ Pro4x's?

And is local pickup an option?
With a 33" spare tire you can use "half" the rear view camera. And Yes.
is it possible to get a picture of where the 7 pin trailer plug cut out is ?
It is cut out on the left side of the receiver, on the bottom of the bumper.
 
Last edited:

KBC

Bought an X
Location
BC
Might be interested in #2 pre runner tube bumper if it has a winch mount for a 1st gen with a 2" body lift. Pics?
 

InSainFab

Bought an X
Location
Thornton CO
Body lift won't be an issue, but this is a minimalist bumper that does not include a winch plate, like the calmini style except we wanted to at least have integrated recovery points.

Front plate bumper TEASER PICS!!! This is for an integrated 22" light bar!!
10934280_10205914397318262_714415590_n_zpscbf29ce6.jpg

10937331_10205914397598269_1280706890_n_zpsb744fd2d.jpg

10913668_10205914397078256_905192323_n_zps30cc82c0.jpg
 

J Everett

Suspension Lift
Founding Member
Location
Houma, LA
Will there be a slightly different version to accomodate for the 2009+ grilles? Or is the same design compatible?
 

J Everett

Suspension Lift
Founding Member
Location
Houma, LA
Thanks for answering all my questions. I can be pretty annoying but I want to be sure before I drop such a significant amount of money.
 

metzican

Suspension Lift
Location
Lafaytte, la
I think this is the first plate bumper that I would of bought. All the other ones stick out to far for my liking it is like they have a huge chin that sticks out 6"-12". I like how it tucks in and has clean lines to the body.
 

ReshmaX00

Test Drive
Location
United States
Alright, is here where I sign up? I'm not sure, Sign me up for a first gen rear tire carrier tho! No Paint, just metal, no rotopax option aswell. Seeing as the group buy time is until the 15th of March, you can put me on the confirmed list. Down payment to get work started at the end of this month and full payment to be made on the first of March. :]

If you guys could let me know what to do from here to finalize and make sure my order will be placed I'd be grateful, thanks.
 

InSainFab

Bought an X
Location
Thornton CO
Thanks everyone!!

Reshmax00, you can sign up here and I can add you to the confirmed list. Please review the OP (original post) for payment information and all related details. Please read it thoroughly and let me know if you would like me to add you to the confirmed list. Thank you
 
Top