2nd Gen P&P Sliders fit standard & BL trucks with no modifications

P&P

Need Bigger Tires
Site Sponsor
Location
Middle TN
We have spent a lot of time working on the 2nd Gen rock sliders in the past couple weeks. We were really unhappy with the traditional mounts used by many other companies. We know a lot of people hate the idea of drilling into the frame of the vehicle, and in many circumstances, we do it. So we reconfigured our 2nd Gen Brackets. The require NO drilling of the frame, no modifications at all to fit up. And we came up with a way to incorporate a feature of our 1st Gen brackets. This new bracket design will work with Standard or Body Lifted trucks, out of the box. So you will be able to use these no matter what you decide to do with your truck in the future.

We did not incorporate the common wing that wraps under the frame on the front bracket. Additionally our front and middle bracket use a single 16mm diameter bolt placed in double sheer, sleeved inside a thick wall high strength steel pin. And because the GenII frame is taller than the GenI frame only the front bracket hangs below the frame, and not by much ~1/2"

IMG_3816_zps54728db7.jpg


The rear mounting bracket utilizes factory 10mm threaded holes under the body mount damper. The provided bolts will be long enough to attach that piece back on over the top of your slider bracket if you choose.

IMG_3811_zps6c457b72.jpg


Legs will be gusseted and corners will be rounded.

And, yea, we got a GenII frame as a jig as well!:zomg:
 

P&P

Need Bigger Tires
Site Sponsor
Location
Middle TN
I don't have a body lifted truck to get pics on, but here is the shop truck wearing a prototype pair. Please excuse the TERRIBLE pics. The truck is stuffed in a tight location right now. We will be doing better pics in the future and 2nd gen sets have begun shipping so we anticipate seeing some customer installs soon.

IMG_3834_zps23e31070.jpg


IMG_3836_zpsdca27d2f.jpg


IMG_3837_zps82d4e163.jpg


IMG_3843_zps36d72fed.jpg
 

metzican

Suspension Lift
Location
Lafaytte, la
Can I see a picture of the front wheel well on a Gen 2 straight on. With running 35" my sliders are a little to close to my tire for comfort. Not to mention they are built for non BL and I happen to have one.
 

P&P

Need Bigger Tires
Site Sponsor
Location
Middle TN
Can I see a picture of the front wheel well on a Gen 2 straight on. With running 35" my sliders are a little to close to my tire for comfort. Not to mention they are built for non BL and I happen to have one.


Just to be clear - from the side of the truck directly in line with the front wheel?

If necessary we can also make custom lengths to accommodate 35"+ wheels. Just shorting the front and/or back section of tube would be no extra charge.
 

metzican

Suspension Lift
Location
Lafaytte, la
Basically a picture of the front wheel and the space behind it. (the area people trim to fit larger tires). It sounds like I will be contacting you about this with an additional addition.
 

P&P

Need Bigger Tires
Site Sponsor
Location
Middle TN
Not a problem, I have a couple pairs to pick up from powder coat tonight/tomorrow. Will get some pics up shortly thereafter.
 

P&P

Need Bigger Tires
Site Sponsor
Location
Middle TN
So is there a price?


There is. But the price is dependent upon which style you choose and the options that go along with it.

You can find all the possibilities on our website/webstore:


LVL I
http://p-p-engineering.myshopify.co...ucts/nissan-xterra-gen-2-rock-sliders-level-i

LVL II
http://p-p-engineering.myshopify.co...cts/nissan-xterra-gen-2-rock-sliders-level-ii

LVL III
http://p-p-engineering.myshopify.co...ts/nissan-xterra-gen-2-rock-sliders-level-iii



Mac@PP
 

importpower99

Bought an X
Location
Boca Raton, FL
There is. But the price is dependent upon which style you choose and the options that go along with it.

You can find all the possibilities on our website/webstore:


LVL I
http://p-p-engineering.myshopify.co...ucts/nissan-xterra-gen-2-rock-sliders-level-i

LVL II
http://p-p-engineering.myshopify.co...cts/nissan-xterra-gen-2-rock-sliders-level-ii

LVL III
http://p-p-engineering.myshopify.co...ts/nissan-xterra-gen-2-rock-sliders-level-iii



Mac@PP

Thanks, I found your website as well. So is there any plans to make a front bumper?
 

P&P

Need Bigger Tires
Site Sponsor
Location
Middle TN
Thanks, I found your website as well. So is there any plans to make a front bumper?

Yes there is. A tube bumper is in the works. The front bumper will have the option to tie to the sliders if you order BOTH sliders and bumper with tube fender compatibility. It will be a front end bolt-on exo-cage kind of setup. Those pieces as coming VERY SOON!
 
Top