LED Group Buy - Closed - Check Here For Updates"

Prime

Shut up Baby, I know it!
Admin
Location
Denver Adjacent
THIS GROUP BUY IS NOW CLOSED.

If you have placed an order and have not received a PM from me, something has gone horribly wrong. Or I just haven't gotten to it yet.

Once the order is placed this thread/post will be updated with tracking information from the manufacturer so that all buyers can track their order to me. Once received, I will re-box and get them shipped out to the buyers. At that time I will PM tracking info to each of the buyers.

Thanks everyone for your participation!!
_______________________________
UPDATE: 05/01/13

I have requested the invoice from the manufacturer. As soon as I have it back, I will do the bank transfer and get the stuff on the way!
_______________________________
UPDATE: 05/02/13

I have received the invoice from the manufacturer. I am still waiting on a few more people to pay. As soon as thats done, I'll send the money.
_______________________________
UPDATE: 05/06/13

I have completed the purchase for the square lights. They should ship to me tomorrow. I'm waiting on PayPal so I can order the bars. I will post tracking info as soon as its available.
_______________________________
UPDATE: 05/13/13

The square lights have come in. Paid for orders have been boxed up and are ready for shipment.

They will go out tomorrow (the 14th). Expect PMs w/ tracking info shortly.
_______________________________
UPDATE: 05/30/13

7" Bars have arrived (FINALLY!). I am repacking now. Expect PMs w/ tracking shortly

_______________________________
UPDATE: 05/30/13

All Paid orders have been packed and are ready for shipment on 5/31. (Except Hyde at his request)

_______________________________



HML-BC236 - 7" Spot/Flood Combo Beam
Dimensions:

Lens is 6" x 2"
Housing is 7 1/4" x 3"
Mounting points: 7 1/4" or 9 1/4" depending on how you mount the ears.
Height from mounting points to top of housing: 5 3/4"
Height from mounting points to bottom of housing: 2 3/4"

Specs from manufacturers sheet:
. LED Power: 36W
. Raw Lumen:2640lm
. Operating Voltage: 10-30 DC
. Waterproof rate: IP 67
. 12pcs*3w CREE LEDS
. Body Color: Black,White
. Color Temperature: 6000K
. Material: Die cast aluminum housing
. Lens material: Plex
. Mounting Bracket: Alu firm bracket
. Beam pattern: Combo
Flood(60 degree)
Spot (12 degree)
. Dimensions:7.5 inch

Includes:
LED Assembly
Mounting legs
Mounting leg to body bolts
Rubber isolators for mounting tabs
Mounting bolts
Nuts
Allen wrenches (All required for complete disassembly)

Price:
$75 each shipped. Plus $65 for each additional.
1 for $75
2 for $140
3 for $205
4 for $270
etc.
Total Interest: 19-20

XN:
- drbandkgb: 2 - PAID
- Jack Stilts: 2 - PAID
- SAKS: 2 - PAID
- Macguyvermedic: 2 - PAID
- gorillamel: 1 - PAID
- J Everett: 1 - PAID
- dhyde79: 2 - PAID

In person orders: 2 - PAID

Other model available:

rupy4eja.jpg


NEW 16W HML-1212
. LED Power: 16W . Raw Lumen:1440lm
. Operating Voltage: 10-30V DC
. Waterproof rate: IP 67
. 4pcs*4w high intensity CREE LED
. Current draw:1.34 @
12V,0.67A@24V
. Color Temperature: 6000K
. Material: Diecast aluminum housing
. Lens material: Pc
. Mounting Bracket: Stainless Steel
. Opitonal Beam:
- Flood beam pattern(90 degree)
- Spot beam pattern(8 degree)

Price: $55 each shipped. Plus $50 for each additional
1 for $55
2 for $105
3 for $155
4 for $205
Etc

Flood: 20
XN
- Prime: 2 - PAID - Duh.....
- Jack Stilts: 4 - PAID
- NismoFire: 2 - PAID
- Xterraforce: 2 - PAID
- mudchet: 2 - PAID

Other orders: 4
 
Last edited:

Prime

Shut up Baby, I know it!
Admin
Location
Denver Adjacent
That's the limitation. Since I would be essentially working as a distributor, the 100 unit quantity has to be one particular style of light. Which one we end up going with I really don't care. I'm waiting for this guy to email me the full price list so decisions can be made in that regard.
 

Roadwarrior

Titan Swapped / SAS'd
Founding Member
I was asking because while it would be sweet to see you have options. I like the Rigid Dually size light to put on the back (saw Fink did it.. want them now) and then if they are water proof and the light patterns are good, I would like to have a bar on the front.
 

Davcos

Wheeling
Founding Member
Location
Ontario, Canada
Hanma is the sister company to Totron, they both have the same products. But with Totron you only need to order a min. of 6 per light, also you can get the Cree bars for almost the same price(6" are the same price) and they are better than the epistar LED's
 

AZhiAZiAM

Suspension Lift
Location
Fresno,CA
Hanma is the sister company to Totron, they both have the same products. But with Totron you only need to order a min. of 6 per light, also you can get the Cree bars for almost the same price(6" are the same price) and they are better than the epistar LED's

if they are sister lights, why wouldn't we do a GB with totron? i'm sure they will do it with us, i know its been done before and is the quality of the lights better than these dave? i like how the totron has slimmer light bars when they get to around 20-30"
 

xterror04

Site sponsor
Founding Member
Location
Carlisle, Iowa
Another x site just did a totron gb.. Maybe wait and see how smooth it goes over I ordered 3 lights maybe wait and see how they turn out?
 

TN4x4Xterra

Suspension Lift
Location
Knoxville, TN
Yeah, I have a set of Totron from the last TNX Totron GB and I have a set of Totron dually from the TNX GB that just recently closed that should be here soon. I was pretty impressed with Totron's quality and I fired up one of the lights and it is bright as hell.
 

AZhiAZiAM

Suspension Lift
Location
Fresno,CA
Yeah, I have a set of Totron from the last TNX Totron GB and I have a set of Totron dually from the TNX GB that just recently closed that should be here soon. I was pretty impressed with Totron's quality and I fired up one of the lights and it is bright as hell.

ya i'm down to wait it was just an idea, since i know a ton of people have totron, and we can just look at davco's build to see how bright they are lol. he is like a moving advertisement of them.
 

Prime

Shut up Baby, I know it!
Admin
Location
Denver Adjacent
I've received the full pricelist and I'm sifting through the Engrish at the moment to see if we can make this work. According to the last email, it may be possible to do a minimum order of 20 lights per type. So as soon as I have all of the pictures/prices put together in a way that people can actually understand, I'll post it up.
 

Prime

Shut up Baby, I know it!
Admin
Location
Denver Adjacent
Yeah yeah yeah. I've been stupid busy with work the past week and change. But my wife is running rescue pretty much all weekend so I should have time to get through it. I have received the "sample" units I ordered. I took one out of the box. Looks pretty good. I'll take some pictures and check performance tomorrow when it gets dark.
 

Prime

Shut up Baby, I know it!
Admin
Location
Denver Adjacent
9uhynepu.jpg
rymyda4y.jpg

sebupa6u.jpg
3a6uma8u.jpg


Pictures of what I got.

They are epically bright. I have some rigged up testing pictures that show the output. Those are soon to come.

I took a closer look at getting a crate of 20 of these from china. These will run $75 each shipped. Plus $65 for each additional. So 1 for $75, 2 for $140, 3 for $205, 4 for $270, etc.

I'll have all the other info for other models in the next few days.

I think these may be the ones I run with for now. There's a local Jeep club that has expressed interest in these. So what do you guys think? The same exact ones are listed on amazon for $180 each.
 
Last edited:

Xterraforce

<img src="http://i164.photobucket.com/albums/u7/ra
Founding Member
Location
Signal Mtn., TN
They certainly look good enough. If they have any kind of durability that would be a nice price for sure.
 
Top