WTB Gen 1.5 stock plastic fender flares

[CaptainMorgan_SOS]

I didn't see a WTB section so I figured I'd add this here.

I am looking to pick up a full set of the plastic stock fender flares for a Gen 1.5 X. I know a lot of you guys have taken yours off and they are just taking up space in your garage, so if you have some you are willing to give up, please let me know.

I am not looking to pay an arm and a leg for these things, so hit me up with a fair price including shipping to 88330 if anyone has a set they are willing to let go of. If I can't find any through here in the next couple weeks, I may end up hitting up some junk yards and pulling them myself.

Or if any of you NM guys have any, let me know and I may just take them off your hands for you

Thanks,
Dave

 

[Roadwarrior]

I can sell you mine, what all parts are you looking for? I will have to find a way to ship them to you..

PM with details.

 

[CaptainMorgan_SOS]

Just the 4 plastic pieces that go around each of the fender wells. I was just thinking about shipping... that might be a PITA. They are light and thin, but when laid flat, they take up a lot of space. A person would need a thin, long, wide box. Maybe make a smaller box out of a bigger box?? I don't really know.

If you can figure out the shipping thing, shoot me a price.

 

[Roadwarrior]

Which parts are you talking about? Find a stock picture so I know what you mean, but I am heading home this weekend so I could get them and find a way to ship them to you..

 

[Muadeeb]

Sounds like the plastic at the top of each arch, not the splash guards

Sent via wild ferrets on crack

 

[CaptainMorgan_SOS]

In this pic, I am looking at the grey plastic pieces that go over and around the lip of the fender well on the front and rear fenders:

They are held in place the fender well by about 4 screws on the front and 6-7 screws, I think, on the rear fenders.

The reason I am looking to pick these up is that I am looking to cut up my current set and extend them with pieces of another set I pick up in order to cover up the sharp edge on my fenders. The trimming of the fenders that we did almost perfectly matches the previous lines of stock fender wells, but now the opening is just longer. I figure that if I can get some extra flares and combine them with the ones I have (a lot of epoxy, some mesh, and some sanding will be required) that I can cover up the sharp metal and retain a "stock" look.

 

[Roadwarrior]

I have those pieces, and that is what I thought you were talking about, just had to make sure. I will get them lined up and see what it would cost to ship them, I think I might be able to just wrap them up all together and then send them. I don't think I have the hardware for them though.. that might have been lost along the way.

What are you thinking for price?

 

[CaptainMorgan_SOS]

I don't need the hardware. When we cut the fenders, the holes for the screws were part of the fender that was cut off. Do you think you could do $40 shipped?

 

[Roadwarrior]

I'll get back to you, I have to see them and see what condition they are in. But I'm in that same ball park I was thinking 10-15 Each, and then figure out shipping.

Sent from space and stuff

 

[mac11]

are these different on the G1.0 vs G1.5?

 

[CaptainMorgan_SOS]

I am not picky on their condition, they are going to get cut up anyways As long as they are still in the stock shape, as in they still line up fine on the fenders, that is good enough for me.

I think the Gen 1 have a little smaller of a wheel well than the Gen 1.5, not much but just a little. BUT, they use the same part number. The wheel well is smaller on the Gen 1 because of the different bumper. So I guess I could have said just "Gen 1" instead of 1.5.

 

[Roadwarrior]

I'll look at mine tonight when I make it home. If I have them, they are yours. They've been sitting in my basement since I took them off.. Ha

Sent from space and stuff

 

[mac11]

If no one has these to you yet I have a parts truck. Pay shipping, throw me 10 bucks and I'll pull them this weekend when im out there working on it.


Sent from my iPhone using Tapatalk

 

[Roadwarrior]

Meant to get these last weekend. I have all of mine.. Sitting in my basement..

Sent from space and stuff

 

[CaptainMorgan_SOS]

Hey man, sorry I didn't get back with you. At the meet & greet we did Sunday, I ended up trading Rok the rear plastic corners I took off for his flares he took off. Thanks for the offer though!