Titan Swap Registry

sleeper00

Bought an X
Founding Member
Location
Dirty Jersey
Post up your titan swaps. This Registry exists over on TNX, but why not have one over here? Don't forget the following:

User Name:
Date Swapped:
Parts used specific to swap:
Pics:
Link to your build thread:

Please no thread jacking. If you have questions, pm or please start a new thread. Lets keep this clean! :cool:
 

sleeper00

Bought an X
Founding Member
Location
Dirty Jersey
Name: Sleeper00

Date Swapped: 8/20/11

Parts used specific to swap:

- Stage 1: Titan UCAs/LCAs, Cam Bolts Radflo Ext. 2.0s, Titan Inner/outer Tierods (Moog Parts), Titan oem Brakelines, Titan CVs and an old gen M205
Travel was about 8"-9", Height was about 2.5" - 3"

- Stage 2 Upgrades: Rough County Titan UCAs, added a PRG 2" spacers, PRG Titan stainless brakelines, New Gen M205
Travel remained the same, Height increased to 3.5"-4"

- (In the works) Stage 3 Upgrades: PRG Titan UCAs, SAWs with Ext Resi, Timbren Bumps
Travel should be about 10"-11", height will be about 4"-4.5"


Stage 1:

2011-08-23_12-46-58_317.jpg


2011-08-23_12-47-08_482.jpg


2011-09-25_12-18-51_274.jpg


2011-08-23_12-47-22_405.jpg


2011-08-21_16-33-30_225.jpg



Stage 2:

2011-11-03_14-03-26_583.jpg


2011-11-03_14-02-31_218.jpg


2011-11-01_15-40-21_992.jpg


2011-11-03_14-02-02_737.jpg



Stage 3:

Pics comming upon the finished product!

Link To my Build Thread: OVERKILL
 

Cr3aK

Test Drive
Location
Las Vegas
User Name:Cr3aK
Date Swapped:21July2011
Parts used specific to swap
-2007- M205 3 fin style front diff
-Titan CV's
-Titan OEM LCAs
-Titan PRG Adjustable UCAs
-PRG Tie-rod extensions
-2.5" Radflo front Coilovers/600lb Eibach springs
-5125 extended bilsteins rear shocks
-Deaver AAL
-PRG adjustable shackles
-Timbren front and rear bumpstops
-2" rear wheel spacers
-SS extended brake lines
Pics:
2011-07-31_16-54-28_213.jpg

2011-07-31_16-54-52_593.jpg

2011-07-31_16-56-56_346.jpg

2011-07-31_16-52-48_823.jpg

Link to your build thread:My X
 

11Pro4x

Triple A<br><img src="http://i164.photobucket.com/
Location
Phoenix, AZ
User Name: 11Pro4X
Date Swapped:
Jan 28 & 29, 2012
Parts used specific to swap:
2010 M205 brand new from Boulder Nissan
Sway Away Coil-Overs with 650 lb Eibach Springs
PRG Titan UCA
PRG TREs
Stock Titan LCAs
Titan Half Shafts from Dan in Vegas
PRG Stainless Steel Brake Lines
2 inch rear spacers
Alcan Leaf Springs for 3.5" of lift and 400 lbs of extra weight
Radflo Ext Resi rear shocks
Pics:
See Below
Link to your build thread:
In signature :smile:
 

Trexx

Bought an X
Location
Colorado
Year: 2008
Make: Nissan
Model: Xterra
Trim: Sport
Color:Silver something






Suspension
Prg Titan Ucas
Radflo 2.5 extended coilovers
Extended Tie rods
Moog titan greasable ball joints( Bad *ss)
Ac Shackles
radflo 2.0 rear shocks
Alcans with 4" and an extra 300 over stock
Powertrain/Driveline Mods
Titan Half Shafts
2008 M205- 3.36
C200 re geared 3.36

Before
0616091902a.jpg


After
IMG_3630-Edit.jpg

DSC01696.jpg

IMG_3710-Edit.jpg
 

GhostX

Allergic to Pavement<br><img src="http://i164.phot
Location
SoCal
User Name: GhostX

Date Swapped: August 18th, 2012

Parts used specific to swap:

PRG upper control arms
OE Titan lower control arms
PRG extended half axles
Nisstec extended brake lines, front and rear
Spydertrax hub centric wheel spacers, 2" in the rear
PRG/Radflo 2.5" coilovers with 650 lb. springs



Pics:

Guts out...guts in.



Wheel spacers and new Bils in.



Front suspension just needs tightening.



Measuring up to Arch'sX...post swap. Pretty damn happy with the results.



Couldn't have done it without some help...Matt/hardrock, Marc/ArchsX, and Hennie/SDCalKLR were a big part of my TS.



Before.



After.



Added Alcan leafs in April 2013.



Grindy sparky.



Always remember...labels to the REAR. FAIL.



Much bettah.



Daylight happiness.

 
Last edited:

chrishaynesusa

Bought an X
Location
SJC
Material List For My Titan Swap: All Parts are NEW!!!!!

1. Titan M205 (stock) VIA RuggedRocks :)
2. Titan CV Halfshafts x2
3. Titan Upper control arms x2 - right and left (PRG)
4. Titan Stock replacement Lower control arms (Dirt King LCA's )
5. (12) M205 Halfshaft Flange bolts (Part# 39606-17V0A)
6. (3) 19mm Diff/Frame Bolts (Part #: 54726-7S000) (to replace the old ones...do not reuse the old ones.)
6a (2)You will need nuts for two of these. (Part #: 08918-3442A) the third one uses a nut that is welded into the frame itself
7. (8) 14mm new front DS bolts (Part #: 37120-4P00A) /nuts (Part #: 37171-7S00A)
8. (2) 32mm halfaxle/hub nuts (Part #: 40262-A60001)
9. (2) M205 flange seals (Part#: 38542N)(optional)
10. (1) Set S.A.W. ext rez 2.5 Racerunner coilovers with BADASSERY written all over it!!!) (PRG)
11. (3) quarts of 75W-90 Synthetic Gear Oil (if you are swapping in an M205)
12. (3) quarts of 75W-140 Synthetic Gear Oil (if you are swapping in an M226)
13. (2) PRG tie rod extensions (PRG)
14. (1) M226 Rear differential (Stock) Operation D44/M226 Completed
15. (1) ARB onboard air compressor
16. (1) ARB air locker for M226 Differential
17. (1) Set 4:10 Superior Ring and pinion Gears for front and rear differentials
18. 2â€￾ rear Wheel spacers
19. (1) front yolk ( connects M205 to drive shaft)
19a. (1) rear yolk (connects drive shaft to rear diff)
20. (2) CAM Bolts for LCA’s
21. (1) Shrock rear diff cover for M226
22. (1) set Extended brake lines (PRG) front and rear
23. 2 " A/C Body Lift
24. ABS sensors for M226
25. (2) Radflo 2.0" Non-Coil Shock w/ Remote Reservoir
26. (2) bump cans
27. (2) Limit straps


backup parts: Titan Lower Control Arms x2 - right and left (stock)
not used: A/C diff skid did not fit due to contact with Fuel tank skid


So some post debrief stuff.

Rooks list of parts as a starting point was AWESOME.
BADASSERY is a WORD!!!
http://www.thenewx.org/forum/showthread.php?t=46048

Special thanks to all members of Operation D44/M226 http://www.thenewx.org/forum/showthread.php?t=52009

Special thanks to Jeff Arabia of Arabias Overkill
He mentioned that all parts ordered bolted in and fit with exceptions noted below.http://www.arabiasoverkill.com/



The A/C diff skid does not fit the M226. (hits the Fuel tank skid and does not fit the contours of the M226 and looks to be shoddy workmanship)....(I'll be talking to A/C and let you know how that turns out. :)

The Shrock Diff cover I ordered did not fit when it came time to mount it. A few phone calls to Mark at Shrock got another one overnighted to Arabias and was made a couple of sixteenth deeper. Kudos to Shrock for doing this.

Diff in a Box !! :)

New:)


#38500-8S11B







IMAG0922_zps1238020f.jpg
IMAG0921_zpsbbd1e4e1.jpg

IMAG0910_zps538f3b2f.jpg

IMAG0909_zps081ce1d3.jpg
IMAG0905_zps967e19a8.jpg


IMAG0934_zps5bee1921.jpg
IMAG0928_zpsdc2a841d.jpg


IMAG0931_zps8e1cc676.jpg

IMAG0936_zps8e06f7f8.jpg

IMAG0957_zpsc15544bf.jpg
IMAG0958_zps14706fad.jpg


IMAG0961_zpsdebb31c8.jpg


IMAG0950_zpse92b9b70.jpg
IMAG0949_zps8380b5c9.jpg


IMAG0941_zpsc711bd36.jpg
IMAG0944_zps80d50aae.jpg


IMAG0931_zps8e1cc676.jpg


In this picture, what is the little piece or metal you have welded between the frame and coil bucket with the hole drilled in it? Right to the right of the res mounts.

Also, this build is awesome dude, nice job putting it all together!

IMAG0977_zps127ed94a.jpg

IMAG0986_zps534d3c94.jpg

This is a gusset to support the links that anchor my bumper(upper area)

the ones from Calmini were not lining up with the 2"BL. So Jeff made those.


IMAG0969_zpsd641bfb5.jpg


IMAG0967_zps61472d9a.jpg


IMAG0972_zps2aae8ab1.jpg
 

GhostX

Allergic to Pavement<br><img src="http://i164.phot
Location
SoCal
How could I forget Operation M226? Your rear end made a lot of friends that year Mr. HeineUSA

 

MiggieX

Bought an X
Hmmmm This Titan Swap registry hasnt been updated in ages. lemme help lolz (if added too many pics lemme know)

Suspension: Titan Swapped
-Radflo 2.5 w/ remote reservoir 650 lbs red springs (Titan Length)
-Radflo 2.5 w/ remote reservoir extended travel rear (Titan Length)
-SPC 25560 Upper Control Arms (Titan Length)
-Mevotech Supreme LCA CMS30116 (Titan Length)
-Mevotech Supreme LCA CMS30117 (Titan Length)
-SURTRACK/TRAKMOTIVE CV Axles NI8203 x2 (Titan Length)
-Daystar KN09107BK Extended Length Shackles 1.5"
-MS30703 Inner Tie Rods x2 (Titan Length)
-MS30606 Right Outter Tie Rod (Titan Length)
-MS30605 Left Outter Tie Rod (Titan Length)
-NissTec 2” Add-A-Leafs
-Front Camber Bolts
-Steel Axle Degree Shims
-Extended U-Bolts
-SPC UCA bolts
-2015 Nissan Titan Pro4X M205 3 Rib 3.36 (23k miles)
-2014 Nissan Frontier Pro4X M226 3.36 w/ E-Locker rebuilt w/ new bearings/seals (100k miles)
-Spicer E-Locker Harness Kit (#10021771)
-Rear ABS Lines for M226

IMG_0388.jpgIMG_2111.jpgIMG_2112.jpgIMG_9251.jpg246532145_4477753442314728_5400952925990493379_n.jpg245333618_3022138038104186_4606619139596211796_n.jpg245990268_1476805102691810_5884001463416721290_n.jpg246071405_1288822104894827_7490747073346286724_n.jpg246177042_744625926493173_8623363482537099061_n.jpg246397504_260000072737680_5665703687381875782_n.jpg
 

RikRong

Bought an X
Location
NoDak
User Name: RikRong
Date Swapped: September 2016
Parts used specific to swap:
  • M205 front diff/OEM Titan half-shafts
  • SPC Titan UCAs
  • OEM Titan LCAs
  • Radflo 2.5 coilovers
  • Titan tie rods
  • Deaver leaves
  • PRG/Nisstec/Nissan hybrid u-bolt flip
  • Radflo 2.0 in rear
  • Nisstec rear bump stop extensions
  • PRG adjustable shackles
  • Nisstec extended rear brake lines
  • PRG extended front brake lines
  • SPC camber bolts
Pics:
First iteration of the suspension:
3mqh4xb.jpeg

After I swapped the Radflos in:
db2ced2360bd1c67a1c5d9a931b395f1.jpg

Random couple of pics:
281344760_10220203221462447_2460073758464165842_n.jpg

277753721_10220059818837471_3508084711901998399_n.jpg

Link to your build thread:
Build Thread
 
Top