- Location
- Central FL
Very very nice sir! Love the color.
J Everett's Blue Meanie
- Thread starter J Everett
- Start date
NMTerras
Suspension Lift
- Location
- New Mexico
Just saw this...wth?
You had responded so quickly when I first posted this thread that my second "reserved" post was after your post. I had asked if a mod could move it up, didn't know they'd have to delete your post. But no worries, I had quoted you and answered before they deleted it.
Sent from high Earth orbit via Telstar I.
Last edited:
NMTerras
Suspension Lift
- Location
- New Mexico
I would say I'm like a ninja, but that's played...
it's all good! I now remember thinking that when I saw your reserved post I'd blown up your spot!
it's all good! I now remember thinking that when I saw your reserved post I'd blown up your spot!
- Location
- Dayton, OH
X looks sharp man! And those sliders look pretty slick too!
- Location
- Hainesville IL
i love that blue paint...... now get it dirty! :smile:
Got my bumper from Maxterra in yesterday, and finally got around to uncrating it this morning so I could bolt it up. I gotta say, all the pictures I've seen on the forum do not do Dave's craftsmanship justice. This thing is a work of art. The powdercoat is excellent as well. Hell, even the packing crate was well made. It blew away all my expectations. If you guys need a bumper, with or without a tire carrier, Dave's your man!
Here it is all bolted up. If you have air tools, it's a one man job, but I still recommend a helper. A concrete floor and a creeper would have been nice too.
Now I just need to run to my dealer and pick up my trailer harnesses.
Also installed my Volant yesterday.
Here it is all bolted up. If you have air tools, it's a one man job, but I still recommend a helper. A concrete floor and a creeper would have been nice too.
Now I just need to run to my dealer and pick up my trailer harnesses.
Also installed my Volant yesterday.
NMTerras
Suspension Lift
- Location
- New Mexico
Sickety sick sick!
idratherbe
Skid Plates
- Location
- North Shore, MA
Looking good!!!
- Location
- West Haven, UTAH
Looking good, and Thanks!
- Location
- Smyrna, TN
That's gorgeous.
- Location
- Carlisle, Iowa
well that didnt take long! looking good dude!
No, no, thank YOU!
- Location
- Bowling Green, KY
Wow I'm behind big time! I thought you still had the elephant! Your new rig is to die for man! I want that color!!
I replaced the crappy aluminum positive battery terminal with a heavier duty brass marine terminal. Probably not necessary, but it gives me a little piece of mind for a very minimal price. I think it was like $3 at O'Reilly.
Got something interesting in the works. Stay tuned.
Got something interesting in the works. Stay tuned.
OK. So, my idea to put my Rigid Dually spots in the OR light pods on the roof is beyond my current technical capabilities. The idea isn't dead, but to do it right will take more than just a simple bolt in adapter, and sadly, it won't be commercially viable. Instead I put the lights in the bumper mouth opening. Which would have been way easier with a right angle drill and a short step bit. Instead I had to take the whole bumper apart. I still need to adjust the passenger side light inboard a bit to match the driver side, but I think they look great in this spot.
And I have the added bonus of having the roof lights and these. Now I just need to get my switch in from OTRATTW.
And I have the added bonus of having the roof lights and these. Now I just need to get my switch in from OTRATTW.
- Location
- Smyrna, TN
Obligatory night shot is obligatory.
As soon as it gets dark.
I just finished wiring it up, temporarily using the switch that came with it, and adjusting the passenger side light so they both look the same distance from the edges of the mouth. I think they look fantastic in that spot, much better than I expected. They're bright enough that I can see them shining on my forklift in the daylight.
I just finished wiring it up, temporarily using the switch that came with it, and adjusting the passenger side light so they both look the same distance from the edges of the mouth. I think they look fantastic in that spot, much better than I expected. They're bright enough that I can see them shining on my forklift in the daylight.
- Location
- Smyrna, TN
NICE. They actually look really nice tucked in there.
- Location
- Smyrna, TN
WHOAAAA! Very nice, Jason. Those little lights are IMPRESSIVE.
- Location
- Idaho!
Looks awesome! I got the same lights and have fun messing with people by only using them at night at times, haha!
- Location
- Central FL
Hahaha love the switch!
Sent from my Galaxy S III
Sent from my Galaxy S III
I just replaced this tag lamp:
It used to be clear, but it's not sealed, so water from the car wash got in it and rusted the circuits. Got another one from Amazon. I don't particularly like the chrome base, but I didn't think to swap it with the black one until I was almost done. I sealed this one with clear RTV and let it set overnight before wiring it up today.
Off:
On:
Doesn't look like much in the daylight, but at night, it's very bright. I don't even know if the one I took off was still functioning, so anything is an improvement. Hopefully I'll never have to mess with it again.
It used to be clear, but it's not sealed, so water from the car wash got in it and rusted the circuits. Got another one from Amazon. I don't particularly like the chrome base, but I didn't think to swap it with the black one until I was almost done. I sealed this one with clear RTV and let it set overnight before wiring it up today.
Off:
On:
Doesn't look like much in the daylight, but at night, it's very bright. I don't even know if the one I took off was still functioning, so anything is an improvement. Hopefully I'll never have to mess with it again.
- Location
- Conroe, TX
Nice man! Does it plug into the existing lp cable?
Sent from my Galaxy SIII using Tapatalk 2
Sent from my Galaxy SIII using Tapatalk 2